12.2In preparation
Burner pressure and gas rate
Checking and setting burner pressure and gas rate against the data plate.
This topic supports
- M12.2Check and set burner pressure and gas rate against manufacturer's data.
The lesson text for this topic is being written. The learning outcomes above, and any artefacts below, show what it will cover.
Interactive artefact
Setting burner pressure
Setting burner pressure at the valve test point against the data plate.
Will demonstrate
- Connecting a gauge to the burner test point
- Comparing with the appliance data plate
- Adjusting and confirming the gas rate
Planned. This interactive will appear here when it's built.