Module M12 · Track 4 Appliances & controls
Commissioning, servicing & relighting
Bringing installations and appliances into service, and keeping them safe.
Lessons for this module are being written. The outcomes and topics below show what it will cover.
Syllabus mapping
- CCN115. Re-establishing the gas supply and relighting appliances
- CCN110. Checking and setting appliance burner pressures and gas rates
- CCN116. Inspecting, testing, commissioning and maintaining appliances (re-assessment only)
- MLPA1.14 Re-establishing the gas supply and relighting appliances
- MLPA1.10 Checking and setting appliance operating pressures and heat inputs
- MLPA2.1 Domestic appliances: generic requirements
- Level 3Unit 305 Gas safety principles
Learning outcomes
By the end of this module, learners can:
- M12.1Re-establish a gas supply safely and relight appliances.
- M12.2Check and set burner pressure and gas rate against manufacturer's data.
- M12.3Carry out a commissioning sequence and complete the commissioning record.
- M12.4Carry out a gas safety inspection and service routine.
Topics
- 12.1
Re-establishing supply and relighting
Restoring a gas supply safely and relighting every appliance.
In preparation1 artefact - 12.2
Burner pressure and gas rate
Checking and setting burner pressure and gas rate against the data plate.
In preparation1 artefact - 12.3
Commissioning and the Benchmark checklist
Commissioning a new appliance and completing the record.
In preparation - 12.4
Servicing and safety inspections
A systematic service and safety inspection routine.
In preparation1 artefact