Artefact · M12 Commissioning, servicing & relighting
Setting burner pressure
Setting burner pressure at the valve test point against the data plate.
Artefact pending
Interactive artefact
Setting burner pressure
Setting burner pressure at the valve test point against the data plate.
Will demonstrate
- Connecting a gauge to the burner test point
- Comparing with the appliance data plate
- Adjusting and confirming the gas rate
Planned. This interactive will appear here when it's built.
About this artefact
Setting burner pressure at the valve test point against the data plate.
Will demonstrate
- Connecting a gauge to the burner test point
- Comparing with the appliance data plate
- Adjusting and confirming the gas rate